===== Controlling a camera using an ATMega32 =====

Author: Robert Harrison

Email: rharrison [email @ goes here ] hgf.com *NB The awkward email address format is to prevent my address being havested by the spammers




===== To Do =====

Everything

{{guides:ixus-400-img_5746.jpg|}}

Picture of Optocoupler and camera

===== Introduction =====
This guide will explain how you can take control a cameras using an Atmel ATmega32 microprocessor.



===== The Plan =====

  * Stuff here

===== Tools and Parts Required =====

  * ATmega32 Development Board
  * Soldering Iron & Solder (14-25 Watts with a fine point should be just fine, get some thin 0.5mm solder for an easy life)
  * Side cutters (or nippers as they are sometimes called )
  * Breadboard
  * Lots of stuff