Differences

This shows you the differences between two versions of the page.

--- projects:infcu1 [2015/07/04 13:39] – infaddict
+++ projects:infcu1 [2016/09/08 14:49] (current) – Updated link to Uputronics upu
@@ Line 47: / Line 47: @@
   * Straight and right angled header pins
-I ordered the GPS and radio items from HAB Supplies and the rest from SparkFun, both of which provided great customer service with fast shipping.
+I ordered the GPS and radio items from HAB Supplies (Now [[https://store.uputronics.com|Uputronics]]) and the rest from SparkFun, both of which provided great customer service with fast shipping.
 ===== Wiring the tracker =====
 My main piece of advice is to download and read the datasheets for all your components before you start wiring things up.  They contain vital information about voltage/current requirements and what pin is used for what.  As with most hobby projects, I started with an empty breadboard and my first job was to get the Arduino microprocessor onto the breadboard.  I soldered 2 strips of header pins onto the Arduino board and pushed it into my breadboard.  I then connected the FTDI breakout board to the Arduino to allow me to connect my laptop via USB.