UKHAS Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Payload Labels ======


There is a Payload Label available from Steve (G0TDJ) at:

[[http://g0tdj.com/PDF/payload_label.pdf|Payload Label]]

It is specific for the UK Amateur Radio & HAB community but Steve has offered to regionalise it by request. Please send an e-mail to steve (at) g0tdj.com with your requirements.

{{:guides:payload_label_sml.jpg?200|}}

**To use the label**, first print either on to stiff card if possible or paper. Very lightly score along the fold line with a knife (do not cut through). Then, with a safety ruler, cut along the trim lines opposing each other. Do not trim to the edge of the card/paper. Once you have cut the label out, fold along the middle and add your information in the relevant fields. Then, if you are using card, use a hole punch to punch a hole where indicated. Thread your payload line through this before launch. If you are using paper, laminate the folded label before punching the hole.

---

Robert Harrison Adds

Payload is harmless unless it hits you on the head :-)